Metal Scrap

HMS 1, HMS 2 Scrap 

PRODUCT SPECIFICATIONS:

Heavy melting steel (HMS) or heavy melting scrap is broken up into two major categories: HMS 1 and HMS 2, where HMS 1 does not contain galvanized and blackened steel, whereas HMS 2 does. HMS is typically traded as a blend of 1 and 2, either a premium blend (80/20) or lower grade mixes (70/30) and (60/40). For example, HMS 1 and 2 (80/20) should consist of HMS 1 and 2 in the ratio of 80% (HMS 1) and 20% (HMS 2).

Each grade guarantees a minimum piece thickness: at least 1/4 inch (6.3 mm) for HMS 1, and 1/8 in for HMS 2

We are a leading importer of Aluminium Scrap Taint Tabor from various countries in Europe and USA. We sell clean old alloy aluminium sheet of two or more alloys, free of foil, venetian blinds, castings, hair wire, screen wire, food or beverage containers, radiator shells, airplane sheet, bottle caps, plastic, dirt, and other non-metallic items.

UBC USED BEVERAGE CAN SPECIFICATIONS 

TALDON – BALED ALUMINUM USED BEVERAGE CAN (UBC) SCRAP

Shall have a minimum density of 14 pounds per cubic foot (225 kg/m3), and a maximum density of 17 pounds per cubic foot (273 kg/m3) for unflattened UBC and 22 pounds per cubic foot (353 kg/m3) for flattened UBC. Size: Minimum 30 cubic feet (.85 m3), with bale range dimensions of 24” to 40” (61 to 132 cm) by 30” to 52” (76 to 132 cm) by 40” to 84”(102 to 213 cm). The only acceptable tying method shall be as follows: four to six 5/8” (1.6 cm) x .020” (5mm) steel bands, or six to ten #13 gauge steel wires (aluminum bands or wires are acceptable in equivalent strength and number). Use of skids and/or support sheets of any material is not acceptable. Must be magnetically separated material and free of steel, lead, bottle caps, plastic cans and other plastic, glass, wood, dirt, grease, trash, and other foreign substances. Any free lead is basis for rejection. Any and all aluminum items, other than used beverage cans, are not acceptable. Variations to this specification should be agreed upon prior to shipment between the buyer and seller.

TALDORK – BRIQUETUED ALUMINUM USED BEVERAGE CAN (UBC) SCRAP

Shall have a briquette density of 50 pounds per cubic foot (800 kg/m3) minimum. Nominal briquette size shall range from 12” to 24” (30.5 x 61 cm) x 12” to 24” (30.5 x 61 cm) in uniform profile with a variable length of 8” (20.3 cm) minimum and 48” (122 cm) maximum. Briquettes shall be bundled or stacked on skids and secured with a minimum of one vertical band per row and a minimum of one girth band per horizontal layer. Briquettes not to over-hang pallet. Total package height shall be 48 (122 cm) maximum. Banding shall be at least 5/8” (1.6 cm) wide by .020” (5 mm) thick steel strapping or equivalent strength. The weight of any bundle shall not exceed 4,000 pounds (1.814 mt). Material must be magnetically separated and free of steel, plastic, glass, dirt and all other foreign substances. Any and all aluminum items other than UBC are unacceptable. Any free lead is basis for rejection. Items not covered in the specification, including moisture, and any variations to this specification should be agreed upon prior to shipment between the buyer and seller.

We regularly import various types of chargeable, breakable cast iron scrap consisting of clean motor blocks, clean drained engine blocks etc.

It can also consist of the following types as per ISRI specifications

(9) Bolsters and/or Truck Sides, Frames: Uncut.

Cast steel.

(11) Cast Steel, No. 2.

Steel castings, over 18 inches wide and/or over 5 feet long.

(11A) Cast Steel, No. 1.

Steel castings, 18 inches and under, not over 5 feet long, including cut truck side frames and bolsters.

(12) Cast Iron, No. 1.

Cast iron scrap, such as columns, pipes, plates, and/or castings of miscellaneous nature, but free from stove plates, brake shoes, and burnt scrap. Must be cupola size, not over 24 x 30 inches in dimension and no piece to weigh over 150 pounds. Must be free from foreign material.

(13) Cast Iron, No. 2.

Pieces weighing over 150 pounds, but not more than 500 pounds. Free from burnt cast.

(14) Cast Iron, No. 3.

Pieces weighing over 500 pounds; includes cylinders, driving wheel centers and/or all other castings. (Free from hammer blocks or bases.)

(15) Cast Iron, No. 4.

Burnt cast iron scrap, such as grate bars, stove parts and/or miscellaneous burnt scrap.

(16) Cast Iron Brake Shoes.

Brakes shoes of all types except composition-filled shoes.

We invite your detailed offers for these types of material.